Adding a Texture for Flair!
This week I am going to discuss textures since I suggested using them in last week’s blog on “The Soft, Dreamy Look,” which created a free action to apply to your images. Textures are a very popular effect and can give a totally nice and different look to an image if applied correctly.
The basic technique involves just adding a texture image (a jpg can be added to a raw, psd or tiff file at this stage) on top of your image. Do this by dragging the texture into your photo as a Smart Object from Photoshop Bridge or just open the texture file and copy and paste the layer onto the photo. At this point I usually rasterize the layer by right-clicking on the Smart Object in the Layers Palette and select Rasterize from the menu. A Smart Object is not necessary unless you are applying a filter to the texture and may want to adjust the settings at a later date. Most texture effects are achieved by changing the layer blend modes and varying layer opacities, then using layer masks to delete out areas where the texture is too obvious. The uniqueness can come from stacking several textures using different blend modes and opacities. There are many resources available on textures and how to use them effectively. The linked article, called “Tips for Texturing Photographs,” has several great tips – some that I want to share.
- How do you match your image subject to a texture? Look for subjects with a soft quality like flowers, misty images, or of simple composition.
- Figure out what you are trying to do with your picture – fill open spaces, get a painterly look, vintage feel, or grunge look?
- If the texture does not work, try a different one. Usually match the texture strength with the subject – soft textures for flowers, stronger textures for structures.
If using textures over photos of people, please check out this short video, “Guide to Using Textures with Photos in Photoshop (must be a member to access now),” to adjust the tone on the people and their skin. It uses the Average Filter in Photoshop instead of layer masks.
Textures can be bought or downloaded for free
There are many beautiful textures that can be bought. Florabella Collections has two very nice sets of textures. I like the Ash Textures that I purchased several years ago, but I just figured out he is no longer selling them. This is a shame since they are really nice textures. Flypaper Textures (blog linked above to Tips for Texturing Photographs) also has some very nice textures for sale. This site also has a lot of good information on textures so take a look. Caleb Kimbrough has released several hundred textures, some of excellent quality and most are free, at his website Lost and Taken. He has also written a really nice blog entry called “How to Create Subtle Grunge Textures” that shows how to make your own interesting textures by combining several different ones.
The top image uses a very popular effect. It is made simply by adding a worn-looking board texture at Hard Light blend mode over a flower photo (Curves Adjustment Layer on photo gives the blown out look). This particular texture is one from BittBox, another great free texture site – this particular texture can be downloaded from the Bittbox Flickr site here – just select the size you want, right click on image, and choose Save Image As to save on your hard drive.
This image was created using a brownish Ash texture layer set to Hard Light at 75% opacity and one of Caleb Kimbrough Summer textures, which I really like, set to Overlay at 73%.
The daisy image started with my “SJ-Soft Dreamy Look Action” that I created in last weeks blog. The image can be cleaned up on a layer before applying the action since it does not require a labeled Background Layer to run. An Ash Texture was added using the Hard Light blend mode at 75% opacity, and an OnOne PhotoTools (now OnOne Perfect Effects 3.0 – website link at my Tidbits Blog sidebar) layer using the HDR Enhancer effect and HiKey Color – Cool Fade preset as a second effect layer (I am getting some nice results with its stacking capabilities). The OnOne PhotoTools effect was basically a darkening of the edges and brightening in the middle, a heavy vignetting feel. Finally an OnOne PhotoFrame was added.
Textures can be found in plug-ins
As shown in the daisies above using the OnOne PhotoTools 2.6, this plug-in has many texture options as does its sister application, OnOne’s PhotoFrame, which surprisingly has many textures that can be applied with various blend modes, just like in Photoshop’s Layers Panel. Even plug-ins like Plugin Galaxy 2.0 have some interesting effects, such as Rain-Short Streaks, Snowflake effects, and Color Effects section, which can add some interesting textures. You just need to play around with whatever filters or plug-ins you have and start trying different settings with them.
Once again my action was applied to the Scottish home picture which starts you off with a really nice soft look (create a composite layer or CTRL+ALT+SHIFT+E layer on top of the action layers to apply the plug-in). An OnOne PhotoTools 2.6 Overlay Effect with the Antique Paper preset at Normal blend mode and 100% opacity was added. A similar look could probably be achieved by adding a final Color Fill Adjustment Layer using a golden tone or a Photo Filter Adjustment Layer using a warm color at a fairly high density, and a layer mask to reduce the color in the house area. That is all that was done to get this nice look.
This image does contain a brownish Ash texture, but any darkish brown texture would look good, set to Vivid Light at 38% but the painterly effect of the sky was achieved in Topaz Lens Effects – with the Graduated Color Blue1 preset applied. Then the layer was copied and set to 62% opacity to make the sky bolder.
Textures can be created within Photoshop itself
I want to show that a texture does not have to be some fancy texture that you have to buy or download – it can just be a really nice paintbrush effect on a layer that you create. Then just experiment with the blend modes, layer opacities, and layer masks to get the exact feel you want.
The above image of Scotland has a rather vintage feel to it. This was accomplished by running my SJ-Soft Dreamy Look Action and then creating a New Layer above and using Grungetract Brushes Sample #16 by alex16 at deviantArt at 2500 pixels with a light tan color. The brushed layer’s blend mode was set to Screen, the layer opacity to 66%, and a layer mask was added using a 50% opacity brush to mask out the texture in certain areas.
In the floral photo, a coral colored Mixer Brush layer was created above the other texture layer using a 300 pixel brush, and was set to Soft Light blend mode. (See my blog “Adobe Photoshop CS5’s Mixer Brushes” for more information on the Mixer Brushes.) It can be quite addictive once you start playing around with the Mixer brushes and create some beautiful textures. I found that the by varying the size and the color of the same Mixer Brush, and actually painting with them by moving slightly, you can get really nice effects. I have included my favorite texture Mixer Brush that can be downloaded here (there area two brushes – same brush at different sizes) and added to your Tool Presets. (Put the file in the User Name -> AppData -> Roaming -> Adobe -> Adobe Photoshop CS5 -> Tools file. Restart Photoshop to add brushes to your Tool Presets – go to the top upper left corner icon under the Menu line and click on down arrow, click on right pointed arrow in upper corner to open fly out menu, and select Load SJ Mixer Brushes Presets. I usually Append the tools and they will appear at the bottom of the list. NOTE: You must have the Mixer Brush selected in the vertical Toolbar to get the Mixer Brush variations to appear in the Tool Preset drop-down.)
This is a very simple example of applying texture that can be done just using Photoshop. First two New Layers were created and the Mixer Brushes I created above were used, the small brush in beige on the bottom layer and the larger one with the same color on the top layer to create an interesting texture. A layer mask was added to the top layer to bring out the center part of the flower. Now here is the neat part, a New Layer was created and a gradient applied with the Gradient Tool . This image used Graphix1 Gradient Muted4 which is a white to yellow beige color, but try out different gradients to see what effect you like. In the Options Bar select the Radial Gradient icon and drag with your cursor from the center of the flower outward to create the gradient. Set the layer blend mode to Soft Light and add a Bevel and Emboss Layer Style (2nd icon from left at bottom of Layer Panel) and double click the Texture option. This image used the Fractures Pattern Overlay, which is located in the Texture Fill set of patterns that come with Photoshop CS5, and set the Scale to 555% and the Depth to +34. Create a layer mask to darken the center again so the pattern is not as apparent over the center of the flower. That’s it – a texture applied that gives a really different look. Try other patterns – you can find lots of them on the internet.
And don’t forget the nice filters that come with Photoshop to create pleasing textures. I really like the Texturizer Filter using the Canvas texture set to Relief 3 to add a painting touch to an image.
I have tried to show that adding texture to an image can be done in many different ways and the different techniques can be combined to get some unique looks. Once again, it is just another way the versatility of Photoshop makes it so much fun to use. It is so satisfying to create your own textures that can actually go towards creating your own artistic style. Have fun creating!…..Digital Lady Syd