Digital Lady Syd’s Artistic Flair!

This week I am just doing a post for the above image only – it took a long time to complete and I thought I would go over the workflow I used to create this rather current look. I have seen very similar images of  famous cities around the world in large poster format. This is an image of the street outside the London Bridge Station in Southwark, London (Boroughs High Street). I took this shot, without getting run over for some reason, during a Scott Kelby PhotoWalk where I joined a British group. It was a total blast and if you have not participated in his PhotoWalks, it is definitely worth the time – great way to meet local fellow photographers and it is free. Below is the original image – I thought you might find that interesting. Not an image that would normally catch my eye.
So how do you get the final image effect? The original image was a good choice for starters since street scenes lend themselves nicely for this look – this particular image has lots of color and detail in it before doing anything to it. Lightroom 5 was used to do a couple things. In the Lens Correction section the new Upright function using the Auto button was first selected. This straightened the image up instantly. The next important thing to do was the crop. After that was done, just minor tone adjustments were made before it made its way into Photoshop. I am finding I use the Auto Upright button on almost all my images now. (See my Tidbits Blog Lightroom 5′s New Upright Adjustments Section.)

I decided I wanted a painterly look so the first place I went was to Topaz (see my Tidbits Blog sidebar for website link) Simplify 4 – this filter gives so many options and presets to try out different looks on your images. Here is what I did to get the image below. In Simplify the Oil Painting B&W preset was applied with the overall transparency set to 0.15 – the opacity of the Simplify layer was reduced to 69%. A white layer mask was added to bring back the detail to all the people’s faces. One of my favorite texture people, Kim Klassen‘s Gentle Whisper texture was added on top and set to Soft Light blend mode at 35% opacity. A Curves Adjustment Layer was used next with a very slight drag down on the curve to increase the contrast a little. I thought I was done and below is what I had created. It was starting to look pretty interesting.

I came back to the image a few days later and just started playing around with it. I actually did three other iterations before I got the final look I wanted. The final image was completed by first adding several steps to the file above, then flattening and finishing up on a different file – this was mainly because the file size was getting too large to handle.

Three layers were added to the second image file using three different grunge brushes and painting different colors into different parts of the image. I used a pinkish-red color for three strips, a light tan on a few of the distant buildings, and pink for the top edge where the bridge bottom shows. It really is not too hard to experiment around and get the look you want. I did use a Burlap texture with the brush to get a nice rough edge. Just be sure you put each color on a separate New Layer so you can play with the opacity and color after the fact. Next Topaz Detail 3 was applied using the Overall Strong Detail II setting – normally I would not use that much but a black layer mask was applied and just the signs were painted back sharp. The Detail was run again to get sharper edges where I needed them. When I do this, I paint on the mask using a 60 pixel brush set to 30% opacity – in fact this brush I use all the time. A New Layer was created to paint out the license plate numbers – just sampled the solid area and painted over them. This is the end of the first file. A composite layer was created on top (CTRL+ALT+SHIFT+E) and saved. The image below is where I am now at.

To get the final effect, the image had to be opened in Photoshop CS5 so Mike’s Kill White filter could be run from Adobe’s Pixel Bender filter which only runs on CS4 and CS5. This is one of the main reasons I have left CS5 on my computer. It is still the best filter for removing white in my opinion, and the one using Pixel Bender is better than their regular filter, which will now run on CS6-32 bit only. (Try removing the white in a layer and applying different layer styles or filters to it to get different effects.) Moving right along now, this file was opened in CS6-64 bit where I merged all but the top Kill White layer. On the Kill White layer, that shows holes were the white was, the layer style dialog was opened (double click outside thumbnail on the layer to open) and the Blend Mode was changed to Hard Light. The Blue Channels check box was turned off which popped in some nice cool gray colors that I really liked. In the Underlying Layer sliders, the black tab was split (ALT+click in the middle and pull apart) and set to 0/167 and the white tab was moved as one tab and set to 226. This adjusted the blue tone colors a little bit. The Fill Opacity was set to 55%. I still wanted more color splattered throughout the image but I did not want it to take away from the total image. A Pattern Fill Adjustment Layer (Layer -> New Fill Layer -> Pattern) was added above and several patterns were tried. I settled on one I would never have thought would work – flashtuchka-d3e5lmu floral vintage patterns using the 10flo pattern (a black, pink and white rose pattern) at 515% Scale. If you look at the upper right tones, you can see a bit of the flowers in the grunge effect. The opacity was set to 60%. Four layers were created on top using Kim Klassen’s brush 2204 from the brushes set in her Cloth and Paper Collection. Any kind of light spray textured brush would work fine. A Hue/Saturation Adjustment was added to get rid of any tones that were too yellow – it was ruining the overall effect. The Yellows Saturation was set to -74 and a black layer mask was added. Just the yellow items were painted out slightly using my 30% opacity soft round brush again. Also the faces were painted back to a more natural color. The last step involved adding a Composite layer on top and my SJ B&W Border Frame.

This may not be exactly what your taste is in art, but I hope I was able to give you some ideas on what you can do with an image by just playing. I really had no idea where it would end up, but by trying different effects, I was able to find something that is both personal to me and I would not mind hanging up in my home. I do not consider myself an artist in the strictest sense, but I do look at some of my work and feel that it does express an artistic flair that represents me, and that to me is art!…..Digital Lady Syd

Digital Lady Syd Related Blogs:
Some Beach Fun!
How to Get That Creative Painterly Look
Photo Art Compositing For Fun
Digital Lady Syd’s Photo Art Workflow