Anything Photoshop or Photography

Topaz Simplify Artistic Workflow

Been under the weather this week so I thought I would just go through my basic Topaz (for website link see my Tidbits Blog sidebar) Simplify 4 workflow. Nothing too fancy, but always a lot of fun to work with Simplify. The image above is a composite of a variegated leaf from Hawaii and the body of a Palamedes Swallowtail Butterfly that was in my penta flowers. The butterfly body was selected and placed on its own layer before moving into the leaf image. On a composite image some of the colors in the leaves were swapped around using the new Topaz Clarity and then Topaz Simplify 4 was applied using my Tulip Preset to get the pretty colors. (The preset settings if you would like them are as follows: oost 0, Details Strength .80, Details Boost 1.29, Details Size 0.96, Remove Small 0.10, and Remove Weak 0.2o; Adjust: Brightness 0.02, Contrast 1.11, Saturation 0.60, Saturation Boost 2.06, Dynamics 0, Structure 1.00, and Structure Boost 1.00; and Edges – Color Edge: Normal, Edge Strength 0.00, Simplify Edge 0.60, Reduce Weak 24.00, Reduce Small 0.20, and Fatten Edge 0.00.) While still in Simplify, another preset was applied, Sketch -> Pastel II preset with Transparency: Overall Transparency set to 0.52. The layer was duplicated and a Gaussian Blur was added to soften the details in the background. With a layer mask, the leaf and butterfly were painted back. On another composite layer, the wings effect was created using the CS6 Oily Classic Blender #4 Mixer Brush to smooth out the rough edges that are a dead give-away that you used Simplify. Just put an OnOne PhotoFrame effect on image (this program is no longer available) and FrenchKiss Studio 3 WhiteWash texture set to Soft Light to give a painterly effect. There were a few other steps and tweaks to get the color pop but overall it followed the workflow below. I love using the Mixer Brushes – always adds that more realistic feel to the Simplify images.
…..This may not be the perfect photo, and obviously I was not that enamored with it until Lightroom 5 came out with their Upright correction, but the more I looked at this image, the more interesting it was. And the color in the image turned out to be quite striking. Below you can see what is going on with all the people. What a treasure trove! You can see all kinds of activities and expressions with just the people in front of this busy cathedral. Very cool!
This follows one of my pretty basic workflows for getting a crisp artistic look to an image, not exactly painterly, but not a photographic effect either.

  • After using Lightroom to straighten up the image at least to an acceptable amount, the image was cleaned up in Photoshop and a sharpener added for clarity of the detail lines. Now is a good time to use both Topaz DeNoise and Detail – I use them both before doing any real painting or filtering of an image.
  • Next Topaz Simplify 4 is used starting with one of their presets, changing it, and saving as my own preset if I like the results and think I would want to use it again. The above images used this preset: Used Painting -> Watercolor preset as a starting point, then adjusted the following settings. Simplify: Color Space YCbC4, Simplify Size 0.46, Feature Boost 1, Details Strength 1.87, Details Boost 0.20, Details Size 0.58, Remove Small 0.10 and Remove Weak 0.20; Adjust: Brightness 0.02, Contrast 0.82, Saturation 0.85, Saturation Boost 2.06, Dynamics 0, Structure 1.00, and Structure Boost 1.00; and Turned off Edges Section.
  • A layer mask is added to the Simplify layer and areas are painted out where more detail was to be added.
  • A Hue Saturation Adjustment Layer is added to adjust colors, green in the above case.
  • A New Layer is created and a Regular or Mixer Brush is selected, an artistic feel is added to the image. Above I used CS6 Oily Classic Blender Mixer Brush #4 (found in the CS6 Mixer Brush Tool Presets when Mixer Brush Tool is selected) for the tree branches to give a more “painterly” look to the image – this brush is excellent for smoothing out jagged edges on any of your images. The opacity of that layer was then set to 46%
  • Another New Layer was created to paint out distractions like wrong colors on white that draws the eye.

The last step for the Cathedral image was to add another a Hue/Sat Adj Layer to get rid of purple color in sign on Church (used a black layer mask and painted back just the sign in white). To see a different way I processed the same image, check out my Tidbits Blog called Lightroom 5′s New Upright Adjustments Section.
…..
Used exactly the same workflow above except in the Topaz Simplify 4 preset, I also checked the Tones section and set the Tone Strength to .67. Some of the grasses did not look natural, so with a 30% soft black brush, parts of the detail in the grasses were painted back to give a more natural look and not so computer generated feel. I find Topaz does seem to do this if you do not get the Simplify slider set just right – that is OK because you will probably want to clean it up in Photoshop a little anyway. The Hue/Saturation Level was set to Colorize and a yellow color used (Hue 298/Saturation 63/Lightness -23). Then a Pastel Brush was used to paint the white blow out daisy flowers that now look yellow, with a couple pink colors to add interest. Several New Layers were created and the petals and edges of the petals were painted using pastel brushes with texture added and the Pencil Tool Watercolor Salt brush to paint around the edges of the flowers to give some additional texture to the flowers. This time two of Melissa Gallo’s Painted Textures were added on top – 2 for Friday Set 5 Green Lake texture set to Soft Light at 77% opacity, and Set 2 Creamsicle set to Pin Light at 37% opacity. Both had a Hue/Saturation Adjustment Layer clipped to them with the Saturation slider to -100 so no color, just texture, was added to the image. I used my free Default SJ Thin Double Edge Frame layer style to finish up.
…..
Just one final image using the same workflow. This is a lovely little dasha in the countryside near the city of Minsk in Belarus – definitely has that fairytale look to it. The Simplify preset used was the Painting -> Dynamic Boost Warm preset, where the Simplify Size was set to 0.37, the Feature Boost to 2, and the Vignetting was turned off. I used OnOne’s PhotoFrame instead. On the Simplify layer, a layer mask was added and with a black soft brush set to 30% opacity, the detail was added back into the area where it was needed to keep it from looking too cookie-cutter. Used the Mixer Brush layer to clean up a few things. Some Curves, Levels, and Hue/Saturation Adjustments Layers to balance out everything and that was it!

It takes a while to get a really good look, but the plug-in definitely helps get you started. Hope this gives you a little bit of a workflow to help get started using this plug-in effect if you have not tried it before. I really love this plug-in – it is easy to use and easy to fit into an artistic workflow. I am not sure there are any other plug-ins on the market that do exactly what this one does. Lots of fun!…..Digital Lady Syd

Digital Lady Syd Related Blogs:
Getting a Nice Painterly Landscape Effect with Topaz Simplify and Texture
Using Topaz Simplify for That Artistic Feel!
Painterly Effect using Topaz Detail and Simplify
Topaz Simplify and Lens Effects Saves an Image!

Advertisements

2 responses

  1. Pingback: Digital Lady Syd Reviews Topaz Clarity | Digital Lady Syd's Fun Photoshop Blog

  2. Pingback: Painting Effects – Which Ones to Use? | Digital Lady Syd's Fun Photoshop Blog

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s