Anything Photoshop or Photography

DIGITAL LADY SYD REVIEWS LUCIS PRO 6.0.9 (NOW AFFORDABLE!)

Image of a painted Tri-Color Ginger PlantThis week is yet another Photoshop plug-in that I am really excited about using. If you have followed plug-ins for years, you know that Lucis has always had some of the best effects ever made. Lucis Pro 6.0.9 has been reduced in price to $30.00 now and that makes it very manageable. (Now priced at $6 until August 31 st when site closes – see my more recent blog How to Get a More Illustrative Look with Lucis Pro 6.0.9.)I had to get it! Now what to do with it? Marilyn Sholin, another wonderful Corel Painter Elite, has provided us with a very short video on how to use this filter – it is not that hard and gives a wonderful pop to your images. See Sholin Lucis Pro video for tips on using this filter and an additional discount code. The Tri-Colored Ginger plant taken in West Palm Beach used this filter at the end of the workflow as Marilyn suggests – either at the beginning or the end.

Below is the original (left image).  For middle image, the plant was selected using Topaz (see sidebar at my Tidbits Blog for website link) ReMask. Topaz Impression’s Cezanne II preset was applied to just the selection, one of my Corel Painter textures was placed underneath, Nik Viveza 2 (now free) was used to emphasize the center focal point, and a Black and White Adjustment Layer was used to just adjust the tone of the image. Topaz ReStyle was used to add more of a pink color palette (see right image) and a Darken Detail layer was created to emphasize some of the lines in the plant. For final step to get image above,  Lucis 6.0.9 was applied and the colors really popped nicely.  (Settings used – Enhance Detail:  Red Channel 199/Green Channel 155/Blue Channel 203.  Mix with Original Image 39% Processed and 61% Original.) For more info on how to perform other steps, see Digital Lady Syd Related Blogs below.
Different stage of painting this image.

*******
Here is another example of the result that can be achieved with this very good plug-in. This image is of the Drawing Room in the 55-room mansion of Henry Flagler that is called the Flagler Museum or Whitehall. Wonderful place to visit!

Image of the Drawing Room at the Flagler Museum (Whitehall)In this case Lucis Pro was applied close to the beginning of the post-processing in Photoshop, right after removing a little noise and the ropes at entrance to the room. (See image below for original as brought in from Lightroom.) Then Lucis Pro was applied using these settings: Enhance Detail Channels – Red 51737/Green 44631/Blue 35165 – large numbers due to the fact the image was in 16-bit mode; Mix with Original Image – 43 % processed and 57% original. This really brought out the detail in all the small items in the room without making the image look crunchy. I found this pretty incredible! The effect can be as subtle as you want. The results look pretty subtle here, but at 100% magnification, the difference can be seen very clearly.

Original image of the Drawing Room at Whitehall

There is a nice PDF Manual that is downloaded with the plug-in which takes you through all the different sliders and what they mean. For me, to get the best results:

  1. Click the Split Channels box on.
  2. Uncheck the Display Composite box.
  3. Adjust the Enhance Detail sliders for each channel to get a good black and white result in each channel. The Smooth Detail sliders are kept at 1.
  4. Turn on the Display Composite Image checkbox. Sometimes the colors will look really bad at this point. If there is a color shift that you do not like, move the Assign Original Image Color slider to 0% Processed/100% Original.
  5. Go back and adjust the Enhance Detail sliders in each channel to make the colors and amount of details just right.
  6. If the results are a little over-cooked, adjust the Mix With Original Image slider which will pull back in some of the the original image.

There are several other sliders and fields in the interface that I did not use but the manual does a good job of explaining all their functions. Check out their User Interface page.  The above workflow is basically what Marilyn Sholin goes over in her video and seems easy to use.

*******

Image of a white gardeniaThis beautiful white gardenia was taken at the Harry P. Leu Gardens in Orlando, Florida, and was my first attempt at using this plug-in. I did not want too much color in the flower, only a touch. (Settings used: Enhance Detail:  Red Channel 129/Green Channel 125/Blue Channel 95.  Mix with Original Image 70% Processed and 30% Original.) It is not that important that you understand all the mechanics going on under-the-hood, just experiment with the sliders and the image will eventually look really good. This seems to be a handy plug-in to use, especially when that little bit of extra detail is needed. I have even used this plug-in after applying my favorite Topaz Detail 3 – they work fine together. Here is another technique used to get this Lucis effect shown in my The Sculpture Called Reaching Tidbits Blog.

I just noticed I am not sure there is an option to try out this plug-in first which is too bad. I have always loved the Lucis filters but was unable to afford them. I am so happy they have reduced their price on this one as it is so much fun to use and does a very good job with both detail and adding a little color into an image. Hope you are enjoying the Spring!…..Digital Lady Syd

Digital Lady Syd Related Blogs:

Digital Lady Syd Reviews Topaz ReMask 5
Nik’s Viveza 2 Plug-In – A Hidden Gem!
Applying a Filter to Objects on a Layer
How To Use a Black & White Adjustment Layer to See Contrast In an Image
Digital Lady Syd Reviews Topaz ReStyle
The Best Dodging and Burning Technique!

Save

Save

Advertisements

15 responses

  1. Beautiful effects, Syd. I think I’m going to buy it but whether I can do such lovely work remains to be seen!

    05/21/2016 at 12:26 pm

    • Sarah – Be sure to apply the second code from the video at the cart check-out for another 15% off. Also, the website has 8 written techniques and a couple more videos that I am going to explore. Thanks for the comment.

      05/21/2016 at 12:39 pm

  2. I may have to look into these plugins. This flower is so beautiful, Syd.

    05/21/2016 at 5:49 pm

  3. Thanks Kerry. I have been a huge Lucis fan for years. This is actually only one plug-in.

    05/21/2016 at 9:25 pm

  4. Pingback: » The Sculpture Called Reaching Digital Lady Syd's Tidbits Blog

  5. The image with the pink striped leaves is stunning!

    05/28/2016 at 4:56 pm

  6. Pingback: » Two Rough-Housing Grizzlies Digital Lady Syd's Tidbits Blog

  7. Pingback: » Totally Stuffed! Digital Lady Syd's Tidbits Blog

  8. Pingback: » Let’s Hear It for the Mighty Fern! Digital Lady Syd's Tidbits Blog

  9. Pingback: WHAT’S NEW IN TOPAZ IMPRESSION 2? | Digital Lady Syd's Fun Photoshop Blog

  10. Pingback: » Busy As a Bee! Digital Lady Syd's Tidbits Blog

  11. Pingback: » Little Fern Flowers Digital Lady Syd's Tidbits Blog

  12. Pingback: HOW TO GET A FANTASY FEEL IN PHOTOSHOP | Digital Lady Syd's Fun Photoshop Blog

  13. Pingback: » The Dressing Table Digital Lady Syd's Tidbits Blog

  14. Pingback: HOW TO GET A GREAT ILLUSTRATIVE EFFECT WITH LUCIS PRO 6.0.9 | Digital Lady Syd's Fun Photoshop Blog

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s