ADDING A CREATIVE TOUCH IN TOPAZ IMPRESSION 2
Since I am a big fan of Topaz products and Impression 2 is one of my favorite plug-ins, I had to share this effect I learned from a Topaz Labs webinar this week. An artist named Bobbie Goodrich presented a webinar called RAW to Envisioned (will add link once it is posted). She used a leopard in a tree image to create a similar effect to the one above. My image was taken of a Hobby Lobby’s Thanksgiving display showing some of their wonderful objects for sale. I might add Bobbie had several other great tips, this one just stood out to me as so creative!
Here is how Topaz (see sidebar at my Tidbits Blog for website link) Impression was used to create this image. The other post-processing steps are listed at the end of the blog under Image 1 Info. On a Stamped layer (CTRL+ALT+SHIFT+E), Topaz Impression 2 was opened. The preset named Le Modern was downloaded from the Community and Bobbie’s settings were then applied as listed: Stroke Section – No. of Brush Strokes Low, Paint Volume 1.00, Stroke Rotation 1.00, Rotation Variation 1.00, Stroke Color Variation 1.00, Stroke Width 0.80, Stroke Length 1.00, Spill 0.03, and Smudge 0.12. What really helps create the effect is the Coverage slider – set to a low amount like 0.01, it will show the smallest amount of image; set to a large amount, the whole image will appear. The Coverage Transition slider adjusts the way the edges blend out. Bobbie used a Coverage of 0.01 and a Transition Amount of 0.08. The Coverage can be repositioned to adjust exactly where the effect shows up by either using the little center icon to the left of the Coverage Center or dragging the white dot in the box. She did not include any changes to the Lighting, Color and Texture sections. I used these settings to make a preset named SJ Leopard Preset by Bobbie Goodrich so I could remember how I use it. She apparently is going to upload her actual preset to the Topaz Impression2 Community, but it was not available when I last checked – will add link if I find it. Otherwise the settings above are from the webinar and are a good starting point.
Now these are the changes I made to the created preset above on the holiday image: Stroke Coverage 0.00, Coverage Transition 0.14, Coverage Center X 0.09/Y 0.03; Lighting Brightness -0.55, Contrast 0.00, Highlight -0.56, Shadow 0.80 and Light Position X -0.90/Y 0.77, Vignette 0.53, Vignette Strength 0.76, Vignette Transition 0.52, Vignette Roundness 0, and Vignette Center x 0.00/y 0.00. The Masking was set to Spot Transition 1.00 and Color Aware 0.71. At the bottom of the panel the Opacity was set to 1.00 Opacity and Lighter Color Blend Mode. The Masking section can be crucial as to how the effect fits into the image. Also the Vignette color can be adjusted to get some nice additional effect on the image.
This image of Holyrood Abbey illustrates more of the artistic feel I think Bobbie was going after. This time the Color section was also used with the above preset and the reds and yellows were adjusted. Also the Lighting section was used to add Brightness, Contrast and a white Vignette. Definitely need to play around with these settings as they can make a big difference in how the final effect looks. The vignette adds to the white space around the image (these settings were used: Vignette 0.71, Vignette Strength 1.00, Vignette Transition 0.72, Vignette Roundness 0.66 and white color). For more image info, check Image 2 Info below. Once you get to this point, it is time to go into the Mask section – and once again I used the Spot Tool. Bobbie used the Luminosity and Brush tabs in her examples, but for this technique, I prefer the Spot Tool (which I could never find a good use for before, so this is nice). The screen capture below shows what the mask looks like – by moving the Edge Aware slider to the right, a more precise selection appears. Adjust the circle into an oval to make the selection fit the image properly.
Another example of using the same Topaz Impression2 preset, this time turning the result into a black and white. This image was taken at the Jacksonville Zoo where these beautiful lions were resting in the sun on a Spring day. This time Topaz Glow2 was used to get a nice lighting effect-used Blake Rudis’s Animal preset. On a stamped layer, Topaz Impression 2 was opened and the same SJ Leopard Preset by Bobbie Goodrich was used with these setting changes: Spill -0.61, Smudge 0.12, Coverage 0, Coverage Transition 0.03, Coverage Center X-0.25/Y0.26; Color Red Hue 0.03 and Sat -1.00; Lighting Brightness -0.21, Contrast 0.12, Highlight 0.52, and Shadow 0.67; and Masking Spot Transition 0.87 and Color Aware 0.65 – centered just on the faces. For more info on image, check out Image 3 Info below.
This effect was a lot of fun to do – give it a try if you want a pretty card or gift label. You definitely have to experiment with the Coverage sliders, Vignette sliders and the Masking tabs to get different looks. Changing the Stroke number from Low to Med or High gives very different looks. Even if the colors do not look just right, they can be adjusted back in PS with the Color Balance or Selective Color Adjustments Layers. I want to try some further experimentation with it, but this is definitely an effect I like. Until next week, have a good one!…..Digital Lady Syd
IMAGE 1 INFO: This image was actually taken with my Android – just did the normal Basic Panel adjustments in Lightroom. In Photoshop it took a lot of clone stamping to get rid of the price tags. Luckily they were all pretty small. On a stamped layer on top (CTRL+ALT+SHIFT+E) Lucis Pro (no longer available) was used to sharpen the overall image (any sharpening filter could be used, it just needed some sharpening at this point). On a duplicate layer, Topaz (see sidebar at my Tidbits blog for website link) ReStyle was used to get a nice color palette – used Ash Gray and Eggshell preset with minor changes. On another duplicate layer, Topaz Glow was opened and My Bliss preset was downloaded from the Community – while in the plug-in, the preset was set to Multiply blend mode at 50% opacity. On another stamped layer, the Topaz Impression 2 preset from above was applied. Last step was to add a little Nik Viveza 2 to the image to really sharpen up the focal point.
IMAGE 2 INFO: Topaz Adjust was used to add contrast to the overall image using the Adaptive Exposure and Adaptive Regions sliders. On a stamped layer Topaz Clarity was used to add contrast (check out Topaz Labs webinar Creative Essentials with Topaz Plug-ins Plus the Official Introduction to Glow 2 by Joel Wolfson for more info on this.) Then Topaz Impression 2 was applied with the above info on a stamped layer. Back in PS, the image was cropped to balance the image. Nik Viveza 2 was used to adjust the focal point. Since I was not quite happy with the color effect, a Color Balance Adjustment Layer was used to add a little blue to the shadows and yellow to the highlights.
IMAGE 3 INFO: After adding Topaz Glow 2 and Impression 2, a stamped layer was created and Nik Silver Efex Pro2 was opened and the Fine Art (High Key) preset was applied. On another stamped layer, believe it or not, Topaz Black & White Effects’s Tone II was applied with the Red filter chosen and Transparency set to 0.28. It was set to 52% layer opacity. Two Exposure Adjustment Layers were added for the female eyes and nose. Topaz Texture Effects 2 was opened and the Soft Grunge Mauve Fog – Basic Adjustment Brightness 0.29, Shadow 0.18, Highlight -0.22, Clarity 0, Sat -0.20, Temp 0.08, Tint -0.02 and Enable Masking-Mask Luminosity 0.45 and Range 0.75; Texture Brightness -0.12, Contrast 0.26, Detail 0.45, Sat 0.37, Color Strength 0.36, and Color 0.28; Color Overlay #71595c (R113/G89/B92), 0.39 Opacity, and Soft Light blend mode; and Masking section painted just a little back to the face using a Strength of 0.34.