Anything Photoshop or Photography

Posts tagged “Black and White Effects

Digital Lady Syd Reviews Topaz Black & White Effects 2.1

I first reviewed this plug-in with its initial release back in my Topaz B&W Effects Plug-In – A Real Winner! blog where I cover lots of things I still like about this plug-in. Behind Topaz Detail 3 and DeNoise 3, plug-ins I consider essential for any image, Topaz (for website link see my Tidbits Blog sidebar) Black & White Effects is my next most used Topaz plug-in – even more than Adjust. And black and white treatments are not the first thing I think about when using this plug-in – I think creative expression (as you can see by this and my related blog posts). It is a very easy way to adjust the tones and color effects without having to do more manipulation later in Photoshop, which is usually required with other black and white plug-ins. When I am stuck on what to do with an image and nothing seems to look right, I can almost always find the answer in Black & White Effects – it never ceases to amaze me what it can do with an image! The actual black and white effect creates very good results also. I loved the original version so to me the newer release is just a better and updated version of the original. It now supports very clear large thumbnail views of the large number of presets (over 200) that come with the program. It has a cleaner interface that is more in line with Lightroom (which I think has the best interface of any program) and its competitors.

The image above shows an example of how I like to use this plug-in. The Traditional Collection’s Warm Tool II preset was used as a starting point. In the Basic Exposure section only the Contrast and Brightness was changed slightly. The Adaptive Exposure slider was increased to 0.16 and the Regions was changed to 15.10 – these two sliders are usually where all the Topaz magic occurs when adjusting image exposure. In Local Adjustments, several different brushes can be applied to the image at different overall strengths. A Detail brush was used to paint over the cups, a Smooth brush was applied to the reddish hanging jacket and white sack, a Burn brush was added over the white sack to tone it down a bit, and a Dodge brush was used on the top cup to make it show up a little more. Only the Color brush was not used above, which can really give an image a very special effect. The final step in the program was to set the Overall Transparency slider to 0.35. For more info on the image processing, see Image 1 at end of blog.

WHAT I LIKE!

1. Price! Price! Price! This program has all the features of the other programs and is a great value if you are not specializing in black and white photography. All the bells and whistles are there. And the guarantee that you are will receive free upgrades – this is a no-brainer in my opinion. I got the upgrade for free and this guarantee is true with all their plug-ins. I do not know of any other software developers that offer this type of program. In fact recently, Topaz released a version 2.1 to add more depth to the program.

2. The Quad Tone section is, in my humble opinion, the major reason this program is better than the others. No one offers these Quad Tone sliders for changing the color combinations (except in Photoshop itself using an 8-bit flattened Grayscale, then to Indexed mode) – this is just plain unique! It also is one of the major reasons the unusual soft effects can be created quickly.

3. There is now a full screen window that shows all the presets on large thumbnails of your image. It makes it really easy to compare the various effects from the different presets. And it will also do this on your own My Collection presets and your Favorites. Very handy! If you do not want to do this, a larger thumbnail will appear with the effect applied to your image as you slide over the list of presets.

4. One little feature it now has, and that I love, is the ability to leave each panel open so you can go back and forth without opening up each section every time you want to adjust a slider. Lightroom has always had this capability and it can be very handy to have various panels open. This can be turned on and off in Preferences if you do not like it, but I think it is great feature.

5. The Overall Transparency slider (which maxes out at only 50% of the color in the image) – use this with the Localized Adjustments Color Brush and you can get some wonderful soft color effects on your images. This combination cannot be done near as easily in other programs.

Version 2.1 Update

6. My biggest complaint was answered – Topaz put in an Apply button so you can stack your effects. This allows you to create special Quad Tone presets and Diffusion setting presets that can be applied to an image after you have created your basic black and white image. What a great feature to have – now you do not have to go out of the plug-in and re-enter – it can all be done at once!

7. Another great addition –  I particularly love the Silver and Paper Tone presets shown as drops of color at the top of the right panel in their new Quick Tools section. These can create some beautiful subtle changes to your image. And once again you can set up special preset effects just for this section to use after the original effect has been created. The Color Filter presets are very nice to have handy also.

8. They added many more variations in a drop-down list for black and white borders that makes this section much more functional. It still has a size slider to adjust how large to make it on the image. I will probably use it much more now.

WHAT I DON’T LIKE!

Topaz has been really great about adding new features to this plug-in, so it does not have too many things I do not like, but there are a few.

1. I have a problem with the Adjustment Brushes totally disappearing. This happens when using a brush tool(s) on your image, and you switch to another section to and change a slider in a any of the other section, like Diffusion Effect for example, leaving your brush panel open. When your return to the Localized Adjustments section the brushes will not appear even. This was a problem in some of the Beta versions and that was fixed but reappeared again in this latest version. Why let you keep the panels open if they do not work when you return to them? I have put in a comment on this in the forum so hopefully this will get fixed soon. This should be an easy fix for Topaz. The work-around is to totally close up the brush panel by clicking the little down arrow next to the number 3 Local Adjustments section (do not worry, your original brush strokes will remain), and re-open it up again. Your brushes will now start working again.

2. Wish they would put an Tone Effect slider for the Quad Tones section so just that area could be adjusted. This is available in Adjust5 and Simpify4. It would also be nice to have a Strength Slider active for the Color Brush, as it is for all the other brushes.

3. Watch out after applying an effect that used a Localized Brush – the brushstrokes are not reset after an Apply. This can really mess your next effect you are adding. Just be sure to reset the section if you do not want the same brushstrokes applied again. (This also happens in Topaz Adjust 5 and Simplify 4, but does not happen in Topaz Detail 3 with the Effect Mask.)

4. Still having trouble getting the correct basic settings back when using the image as a Smart Object – I cannot get them to stick. The Last Used preset usually appears from when the program was last opened. I feel this is the weakest point with all the recent Topaz plug-ins. If there are settings I really need to remember, I create a preset or create in Notepad a list of my setting to copy into a Note in Photoshop (sits with the Eyedropper Tool).

5. Little personal complaints here: I miss the old preset image that was on the top left. Sometimes the large thumbnails are just too much and stick a bit more than I like and it would be nice to have that choice back. That is just my personal opinion. Please make a larger Apply button at bottom like in the other programs. Another little request of mine. Please move the size icons back to the right – I do not like going up to the top of the middle of the image to increase to 1:1.

I guess I am sounding a little critical in this blog, but this is such a good plug-in that I would really like it to be perfect. I know Adjust is Topaz’s  best known plug-in, but this B&W Effects has the ability of being one of the best ever created with just a few tweaks. There are some other really nice features too. There is now a Curves Tool section and a nice selection of curves to choose from in a drop-down list which other programs do not offer – this is very handy if you are not liking the way the image looks and need to add some quick contrast. It still has the Diffusion section where the Softness, Diffusion and Diffusion transition can be adjusted gives a slight softness to the whole image – add the detail back in a specific area by using opening the Localized Adjustments and selecting the Detail Brush. This is a wonderful addition to your images and also appears to be unique to B&W Effects. Usually this is found in a color effect plug-in. Another add-on that has been included is a Zone Mode (click the Z at the top right which changes the navigation window into a histogram). By clicking on a number underneath, you can see by different colors which areas are part of that zone on your image. Since I am not into black and white and the Ansel Adams effect to that extent, it is probably not a feature I will use a lot, but many people will find this extremely useful.

If you have other Topaz plug-ins, you will find they all have very similar interfaces and the learning curve is pretty quick for this plug-in. As you can see from my selection of images and previous blogs, I really like the artistic flair this plug-in can add to an image for a needed pop. It is especially strong with the vintage feel. Since I own the other plug-ins and I have been comparing results, I cannot find any areas that Topaz has missed for those interested in doing straight black and white conversions.
……These begonias were just ending up too bright for my taste. To tone it down subtly, as a last step this image was opened up in Topaz Black & White Effects II using a preset I created in the first version that I call SJ Vintage Feel (all my old presets were moved upon updating). This preset contains these settings for Basic Exposure: Contrast 0.06, Brightness 0.06, Boost Blacks 0.26, and Boost Whites 0; and Finishing Touches: Silver and Paper Tone – Tonal Strength was set to 0.64, Balance 0, Silver Hue 12.29, Silver Tone Strength 0.85, Paper Hue 43.90, and Paper Tone Strength 0.38. The Overall Transparency slider was set to 0.55. It gave the soft feel that I needed with just a few clicks. This is something that I cannot do as easily if at all in the other black and white plug-ins. See Image 2 below for more details.
…..Another image from the Native American Festival. These beautiful leather purses being sold by a vendor looked a little overcome by color in the original RAW image. But by using the Black & White Effects plug-in, it becomes much more interesting to view. For the post processing in this image, all I did was click the reset button down at the bottom of the right-hand panels. Then I just went into each section and adjusted each slider until I liked what I saw. One section to look very closely at is the Adaptive Exposure and Regions sliders in the Adaptive Exposure section – these two sliders will give some very good results (this is true with any Topaz filter that has these sliders – always check them out). See Image 3 below for more info.
…..
These beautiful pink dahlias were so easy to process. It was hard to decide which version to present but this was basically created by combining a very rich texture with Black & White Effects. I used a preset I had created called Hawaiian Morning uses my favorite Quad Tone section to get the results that are always spectacular. See Image 4 below for preset settings if you would like to them. The Black & White Layer was set to a Hard Light blend mode at 75% opacity so the original image is still preset.
…..

To create my rather dark sepia toned image, Black & White Effects was applied to the image layer and also to one of the texture layers. The Platinum preset was applied with a Diffusion effect added, and then used a Detail Brush to bring back the fairies face. Another preset was applied to add a Quad Tone effect to the image for the nice sepia feel. See Image 5 information for more details, including my preset settings. A colorful texture was added in Photoshop on top of the fairy layer, and another of my old presets was applied to it to give it a similar color tone.
…..I took some artistic liberty on this image of the Towers at Westminster Abbey in London. I wanted to make the picture look different from what everyone else has. My first step once in Photoshop was to go to Topaz B&W Effects 2 and just added Traditional Collection High Pass I with the Creative Effects Diffusion – Softness slider at .16 and Diffusion slider at .14. Then three textures were added to get the final effect. See Image 6 info for more.

Bottom line – if you want a black and white plug-in, this is a fabulous way to go without spending so much and you get all the added color options. This program is one of the most powerful in the Topaz line-up in what it provides and the new upgrade just gives it a fresher look. It is still a solid contender as a black and white plug-in. It is definitely worth a second look if you want to add some creative aspects to your images. Check out my related blogs below – there are many different Quad Tones settings you may like. Definitely try out the trial and see what you think!

Sorry for the long post, but this is really that good a plug-in so I felt it needed to be reviewed thoroughly……Digital Lady Syd

Digital Lady Syd Related Blogs – check them out to see how I used this plug-in in different ways:
Beautiful Feathers!
Digital Lady Syd’s Rule No. 7: Check Out Your Local History
Clowning Around with Topaz!
Where Am I?
Hibiscus Flowers – I Love to Photograph Them!
Black and White Effects on Outside Art
Cleaning Up a Messed Up Photo
Topaz Black and White Effects Quad Tones Are Great!
The Art Corner: Painting and Sculpture by Tassaert
Sunny Preset for Topaz Black and White Effects
Quad Tones in Topaz Black and White Effects Plug-in
…..
IMAGE INFORMATION
Image 1: Topaz Detail 3 using the Overall Medium Detail II preset was applied – a layer mask filled with black was added and the mugs were painted back. Next Topaz Black & White Effects 2 was applied using setting discussed above. Kim Klassen’s Return texture (sign up for Kim’s newsletter and get several of her beautiful textures including the Return texture used in this image) was added with a 78% layer opacity – a white layer mask was added and the center of the image softly painted back into view. Next French Kiss Artiste Breeze texture was set to Overlay and 53% opacity. 2 Lil’ Owls Bonus Texture 4 (see my Tidbits Blog sidebar for website link) was used as a border in white that was placed around the image. A Curves Adjustment Layer was the last step to add some contrast back into the image.
Image 2: This image actually used Topaz Detail 3 twice and localizing the effect on the flowers. Also some leaves had to be added to cover some rather ugly tissue paper that was sticking up. Three textures were stacked: 2 Lil’ Owls Mosaic Set Destine texture was set to Soft Light at 100% opacity, Kim Klassen’s Cloth & Paper Texture Florence set to Soft Light blend mode at 47% layer opacity, and French Kiss Artiste Avril texture set to Overlay blend mode at 29% opacity. A Curves Adjustment Layer was applied and the Auto button clicked to get the good colors. Then the Black & White Effects plug-in was applied as stated above.
Image 3: This image was very simply processed. Just used Topaz B&W Effects 2 to begin with using settings under image, then added a slight S Curves Adjustment Layer and painted out the two purses in the middle to add focus. Next a Levels Adjustment Layer was added with the middle tab set to 0.65 and the Output Levels set to 41 to soften the image just a little.
Image 4: I bought these dahlias to plant in my yard, but before I did, I took their picture using a kid’s bent white poster board for a background. It was then easy to add a painterly texture to the image without any distractions in the background. Mellisa Gallo’s Painted Textures 2 for 5 Friday Spring Sky texture was added. The Dahlia layer was duplicated, moved on top, and set to Soft Light blend Mode at 100% opacity – this removes all the white areas so the texture shows through. A Levels Adjustment Layer was clipped (ALT+Click between layers) and the Output Levels were set to 0 and 229 to lighten the image a little. Next I used created darken and lighten layers to dodge and burn on the flowers (see my The Best Dodging and Burning Technique! blog). A composite layer was created on top (CTRL+ALT+SHIFT+E) was placed on top where Black & White Effects was applied. (Here are the settings I used: Adaptive Exposure:  Adaptive Exposure  0.41, Regions  26, Protect Highlights 0, Protect Shadows  0, Detail 1.11, Detail Boost  1.09, and Process Details Independently; Quad Tone: Color 1 Region (R1/G1/B12) at 15.08, Color 2 Region (R63/G78/B85) at 143.9, Color 3 Region (R216/G211/B129) at 227.5, and Color 4 Region (R255/G254/B237) at 255.0;  Vignette:  Vignette Strength  -.039, Vignette Size  0.83, Vignette Transition  0.58, and Vignette Curvature  0.70.; and Transparency:  Overall Transparency 1.00.). Once back in Photoshop, in the Layer Style Advanced Blending section, the B Channel was unchecked which gives a bluish tint to the whole image. The layer was set to Hard Light blend mode at 75% opacity.
Image 5: Once out of Lightroom, Black & White Effects 2 was applied using the Platinum preset and changing Adaptive Exposure slider to 0.42. Next the Diffusion section was opened and the Diffusion slider was set to 0.79. In the Located Adjustments, the Details Brush at 0.50 opacity was used to paint detail back into the fairy’s face and hair. These settings were applied. Next a Quad Tone preset was applied and set to an Overall Transparency of 1.00. (Here are my SJ_Quad_DkB_Gr_Yel_Wh preset settings: Color 1 Region (R1/G1/B12) at 15.08 ; Color 2 Region (R63/G78/B85) at 143.9; Color 3 Region (R216/G211/B129) at 227.5; and Color 4 Region (R255/G254/B237) at 255.0.) Back in Photoshop Kim Klassen’s Framed texture was added on top and set to Soft Light at 100% to get the slight edge around image. Next Kim Klassen’s Abstract Texture was added and taken into Black & White Effects 2 where my SJ Partial Color Look preset (one of my favorites) was applied. (Here are the settings for this preset if you would like them: Basic Exposure:  Contrast  0.10, Brightness  -0.02, Boost Blacks  -0.10, and Boost Whites  0.50; Adaptive Exposure:  Adaptive Exposure  0.64, Regions  50, Protect Highlights  0.02, Protect Shadows  0.02, Detail  2.28, Detail Boost  1.00, and check Process Details Independently; Quad Tone:  Color 1 Region  (R16/G15/B11) 7.46, Color 2 Region  (R79/G78/B68)  83.33, Color 3 Region  (R159/G156/B143)  164.2, and Color 4 Region  (R255/G254/B242)  255.0; Film Grain:  Grain Kodak TMaxPro 100, Grain Contrast  1.25, and Grain Size  32.50; Vignette:  Vignette Strength  -.058, Vignette Size  0.92, Vignette Transition  0.28, and Vignette Curvature 0.11; and Transparency:  Overall Transparency  0.67). This layer was set to Soft Light blend mode at 43% opacity.) Now just a Levels Adjustment Layer and a couple text layer using free Radium J and Batik Regular fonts.
Image 6: The three textures used in the image were: Melissa Gallo’s Painted Textures Winter Storm set to Linear Burn blend mode at 42%, Taupe Canvas set to Linear Dodge at 48% opacity, and Confetti set to Color Burn at 60%. These textures were all obtained from her specials such as Black Friday or 2 for Friday specials.


Digital Lady Syd Reviews Topaz Detail 3


The above was my first attempt at trying out Topaz Detail 3 and I am not disappointed. (For Topaz website link see my Tidbits Blog sidebar.) To sharpen an image I usually use the High Pass filter, Unsharp Filter or convert to LAB and do localized sharpening on the L channel. Detail 3 makes sharpening so much easier and gives several ways to adjust your sharpening to get the detail effect you want. This upgrade was definitely needed – and what I like most is that you can now localize the detail. All I can say is Love It! Love It! Love It!

Since I am such a big fan of Topaz anyway, I decided to use several of their plug-ins on this image from the 39th Annual Daytona Turkey Run Car Show, the largest in the US. If you look close at this guys face, you can see a slight smile – Detail really brought that out. I first started processing this image in Lightroom (see the RAW image below) with just the Basic sliders. In Photoshop I went immediately into Topaz photoFXlab, their new plug-in interface that I love. (See my Digital Lady Syd’s Review of Topaz photoFXlab v1.1 blog.) Next the Black and White Effects plug-in (this plug-in does things like no other filter I have seen) and from the Opalotype Collection the Hand-Tinted Chiffon preset was applied. The only change was to the Vignette which I centered on the car and adjusted the vignette sliders. Back in photoFXlab, Adjustment tab settings using the Dynamics slider (my favorite), Sharpness, Highlights and Shadows were applied. On a +From Stack layer (composite), the new Detail 3 plugin setting using just the Large Detail set to 0.53 was selected. Then in the Effect Mask tab, I lightly painted out the grill so as not to overdo the sharpening effect on it. The Overall Effect slider was set to .78 and that was it. In Photoshop the last step was to add French Kiss’s free Glorious Grunge Edging Overlay with grunge removed from center. It turned out beautifully!

What I Like about Topaz Detail 3!

1.  Totally love the localized detailing that can now be done – the Effect Mask can be used to either paint in or paint out areas of the image so just what you want sharpened is affected.

2. The effect is usually pretty subtle but makes an incredible difference when viewing the image! There is an Overall Opacity slider in the Effect Mask tab that can be reduced to lower the detail globally if it appears to be overdone.

3. The Cyan-Red, Magenta-Green, and Yellow-Blue Tone sliders where you can enhance a single color have always been a favorite, even in Detail 2. Also Color Temperature and Tint sliders are now available. These sliders all use the IntelliColor feature that keeps unwanted color shifts under control.

4. What I just learned is that the Detail plug-in can also be used as a final sharpening for printing your images.  Topaz did a You-Tube video called Output Sharpening for Print with Topaz, presented by Hal Schmidt using this process with Detail 2. I am planning on checking this out when I get a chance.

5.  Details can actually just be added to the Shadows or the Highlights of your image or both with different settings. Really handy when you have a difficult image to work on.

6. New Deblur technology from Detail 2 that brings out micro details – great for macro photos. I have not had a chance to really use it yet but it sounds like a very promising feature.

What I Do Not Like!

1.  I have a bit of a problem with the Effect Mask – I have a hard time making sure I am covering everything I need covered and at the correct amount. It would be nice if they had a colored overlay, as with Lightroom’s Adjustment Brush, that would give you a feel as to where you were going out of the edges.

2. I wish the Undo/Redo buttons would work on the Effect Mask. The only way you can erase an area you accidentally painted over is to move the brush to a different amount and hope it covers. This works okay if using Brush Strengths of either 0 or 1.00, but when in between, it gets hard to fix. Sometimes it is easier to just start over by resetting the mask. The other plug-ins, like Adjust and photoFXlab, have these buttons working. (A request on Technical Problems has been posted in their Forum on this matter.)

3. This is a small nag, but when you apply an effect, you need to make sure you press Reset button in the Effect Mask to clear the mask window or it stays on even after pressing the Apply button. When you start to make other effect changes, the mask is still there. This is also true if you have painted out an area, for a certain preset and then change your mind about that preset, press Reset All in the Adjustments tab, the mask is still in the window. Sometimes this is good if you still want the mask, but sometimes it is frustrating until you realize what happened. Most of the other plug-ins will retain the mask before you apply an effect, but clear it after applying.

4. Another small nag, but often the program gets confused and opens up on my second monitor instead of over Photoshop or photoFXlab – not sure why it happens but just some of the time.

Overall the negatives are not that big a deal although I hope they do fix No.2. The revamping of this plug-in has made it so much more useful – I am looking forward to having it in my workflow!
…..
These beautiful little miniature mums are once again my subject. This time a little processing in Lightroom, but not much. (See image below as it was brought into Photoshop.) DeNoise 3 was applied with just an overall Strength of .11 – now you do not need to adjust the Recover Detail slider if you are going to use Detail 3. Next Detail 3 was opened and applied 3 times! Yep – First in the Creative Detail Collection, the Overall Detail Strong II preset was applied and it really sharpened the flower petals and center. Next from the Stylized Detail Collection the Desaturated Blush II was applied and that beautiful texturized background appeared. Finally from the same collection the HDR Enhancement I was applied – in the Effect Mask the mask was inverted to black and with a brush set to 1.00, the center of the flower was painted back. Now to get just the right effect for the center, back in the Adjustments tab the Saturation Boost was set to .44. That is all that was done to this image to get this beautiful effect other than adding my B&W Border Frame Layer Style. I was totally surprised by how much detail was in the image that you could not see originally and by how beautiful a texture could be created by playing around with the presets and applying different ones.

…..

This image of one of the Haunted Houses at for the Halloween Horror Night at Universal Studios Orlando was created very quickly – below is what the image looked like after just basic Camera Raw corrections were done in Lightroom. It is not bad but Topaz added those subtle changes that really improve the image. First Topaz photoLabFX was opened and the layer duplicated. Since the image had quite bit of noise in it as it was taken at night and without a tripod, I felt it needed to have Topaz DeNoise 3 applied first – just a little Strength set to .11 and Detail Recovery set to .26 (did this before I realized that it could be done in Detail 3) – the noise was cleared. (I love DeNoise!) Then I went into the new Topaz Detail 3 plug-in and applied the Architectural Detail II preset.  Exit and a Stamped layer was created where Adjustment tab settings for the Temperature to -8 (for a more blue tone), Saturation to -23 (it was really bright  and the light was coming from everywhere), Dynamics to 27 (my favorite slider in all of Topaz – just works!), Highlights to -89 and Shadows to -23 were applied. French Kiss Glorious Grunge Edging free overlay (see link above) was applied and that was it. I was amazed how much the Detail 3 and the Dynamics slider together made this image pop. I have to say this picture reminds me of one of my kids favorite childhood books, the Berenstain Bears and the Spooky Old Tree!

…..

This is another example of the creative aspect of this plug-in – this image turned out very different than what I thought it would look like. This beautiful Monarch butterfly was not very happy with me taking her picture and it took off about two seconds after I captured this image. I got exactly two pictures! (See RAW image below.) After doing my Camera Raw work in Lightroom, the image was brought into Photoshop and Topaz Detail 3 opened. I applied this plug-in twice to get this effect on the butterfly and background. First application used the Stylized Detail Collection Abstraction I preset – then in the Color Section changed the Temperature and Saturation sliders. In the Effect Mask, at Strength 0.64 on a black inverted mask, the butterfly was painted in so the changes were made to just the background, but a little to the butterfly. This created the very soft background. Then Topaz Detail 3 was opened again and this time Creative Detail Collection Feature Enhancement I preset was used. This time it was applied just to the butterfly and not the background. Changes were made to the Tone sliders,including the Cyan-Red (0.82), Magenta-Green (0.68), and Yellow-Blue (-0.30) sliders – these are unique to this plug-in for Topaz and they can make an incredible difference in an image. These are not new to Detail 3 but are still one of my favorite parts of the plug-in. In Photoshop French Kiss Artiste Collection Charmante texture was added and the butterfly painted out, some text typed in and warped, and that wonderful grunge overlay applied again – I must be on a grunge kick?


…..

I decided to try a little different effect for this image from the top of the Sky Tower of the Kraken Roller Coaster (check out the link for crazy roller coaster video) at SeaWorld Orlando. This image was pretty complicated as I used 4 different Topaz plug-ins to get the final effect. First my normal workflow in Lightroom. Next Topaz photoFXlab was opened and the Adjustment tab was used to adjust almost all the sliders including Dynamics that was set to 50. On a stacked layer Black and White Effect was opened and from the Albumen Collection, Chocolate preset was applied with Film Grain turned off and the Transparency set to .49. Topaz Detail 3 was applied – there were areas on the image that had been slightly lightened and blurred due to reflections from a window in the Sky Tower.  To get rid of these reflection marks and make them blend into the rest of the image, I selected the Creative Detail Collection – Texture Enhancement II preset. This really over detailed the image as it was pretty sharp due to the wonderful Dynamics slider. In the Effect Mask, it was inverted and with a brush set to Strength .55, I painted over the light areas in the black mask. Then went into Adjustments tab and changed the Exposure to -.08 and Contrast to 0.45 to make the changes blend in. This is a terrific use for this filter and makes its value so much better than Detail 2. Topaz Detail 3 was applied again using just a change to the Cyan-Red slider – it was set to -1.00 to bring out the cyan roller coaster track. Finally Topaz Len Effects Vignette – Selective was set to draw the eye to the highest point of the coaster – very subtle. My Thin Double Edge Frame Layer Style was applied sampling frame colors from the image.

…..

I love Topaz products and Detail 3 is no exception. I actually purchased Detail 2 as my first Topaz product – I did not use it to the extent I could have but I did use it at times for the detail and color toning I needed. Detail 3 is definitely a big step up and it does create that extra bit of sharpening and detail that is usually needed at some point in your post-processing workflow. And don’t forget that once you buy a plug-in from Topaz, the upgrades are free! I got this version for just owning Detail 2! You should definitely check it out!…..Digital Lady Syd


Topaz Plug-Ins – Same Image Trying Each!

Since I am such a big fan of Topaz, I thought it might be interesting to use the same image and see what effects I could come up with using each of the five major plug-ins in the Topaz Plug-in Bundle (to go to website, click on the sidebar in my Tidbits Blog). The photo is of an old Sears Victorian house built in St. Augustine about 100 years ago. There are still a few that can be seen when driving around the city. Very beautiful houses! I could picture myself living in one! All these images were finished by painting in a flare in the top right corner using my Lens Flare Brushes since the image was blown out by the sun in that corner, and a Curves Adjustment Layer. I have written about almost all of these plug-ins previously, so check out my related blogs at bottom if you find you want more information on one of them.

Topaz Adjust


This is the mainstay of the whole Topaz Plug-in Bundle, in my opinion, so this is the first plug-in used on the image. I used a preset I had created a long time ago to get this effect. Basically it involved using a warm feel to achieve an early morning look. Many different filters could easily have been used – this plug-in is fun to try on new looks to your images.

Topaz Simplify


This is a creative plug-in – definitely gives a more painterly look as opposed to the more realistic look some of the other plug-ins give. The canned Buzz Sim preset was used to create this look, an effect I have always enjoyed – see my blog “Simplifier and Simplify Filters” about the original filter that was picked up by Topaz many years ago.

Topaz Lens Effect


Topaz recently updated this plug-in and added three more filters and several presets to make this plug-in even more versatile. I am not the best at setting up a great depth map, it does take some practice. In the image above, you can see that the center ground is more in focus than the foreground and background. This is where this plug-in really excels and once you get the hang of it, it is quit effective. I do not know of any other plug-in that does this type of effect. In this image, a Bokeh Selective effect was applied and several adjustments made after the depth map was created. This plug-in allows you to stack filters, so next a Filter Dual Tone was created where a Blue/Cyan color was added to the top and a slight yellow cast added to the bottom of the image. Finally a new filter from the latest upgrade was used called Warmth and the Warm I preset was applied. Overall, a bit of a different look with softer lines of the house with the focal point being centered on the palm tree and the color beams in the image.

Topaz Detail


Topaz Detail is an overlooked plug-in but actually gives some wonderful results. This image uses the Desaturation Blush preset with the Saturation slider set to -0.62. It gives a very nice effect on this house and perhaps the most natural of them all. I was surprised how similar it looks to the Topaz Adjust filter result.

Topaz Black and White Effects


This is my favorite plug-in in the bundle and a relative newcomer. Every time I use it, the image comes out really nice – not necessarily like I shot it, but with a bit of artistic flair added, and yet it retains the true nature of the image. It looks like how I envision an old Victorian house should look on a hot summer morning. Totally unique feel. In this image a preset I created for a sunny water landscape was used. (This preset contains the default Basic Exposure settings; Adaptive Exposure Settings: Adaptive Exposure 0.18, Regions 26.10, Protect Highlights and Shadows – 0, Detail 1.11 and Detail Boost 1.09; Quad Tone settings: Color 1 Region (color R1/G1/B12) set to 0.60, Color 2 Region (color R63/G78/B85) set to 95.97, Color 3 Region (color R216/G211/B129) set to 141.2, and Color 4 Region (color R255/G254/B237) set to 255.0; Edge Exposure set; and Transparency set 1.00. The key to this look is the Quad Tone section in Finishing Touches. See my Tidbits Blog “Quad Tones in Topaz Black and White Effects Plug-in” for more information on this.

Topaz Adjust, Detail and Black and White Effects


Topaz has done a wonderful job of providing great videos to learn how to use all their plug-ins provided in the bundle. A video, “Creative Essentials with Topaz Plug-Ins presented by Joel Wolfson,” was presented where he went over his Topaz workflow to create some beautiful works of digital art. I followed some of his suggestions and created this final image. I was very pleased with the results – looks similar to the one above but is more of a black and white effect and, again, not unlike what I visualize an old Victorian house might look like.

I hope this is giving everyone a chance to see the flexibility that this bundle of plug-ins can produce. With just a few of these plug-ins, a great variety of effects can be achieved and they can be used together to get even more interesting results. I am very happy that I have this set of filters at my fingertips – they do produce beautiful results. …..Digital Lady Syd

Digital Lady Syd’s Related Blogs:
Using Topaz Adjust 5 and Color Efex Pro 4 with Photoshop Elements
Topaz Adjust 5 Is Here! First Look!
Topaz Lens Effect’s Artistic Flair!
Combining Plug-ins – Double the Effect! (Several Topaz Plug-ins)
Little Nighttime Fun from Topaz! (Topaz Adjust and Len Effects Plug-ins)
Loving Both Filters (Topaz B&W Effects Plug-in)
Trying Out the Minimalist Look? (Topaz B&W Effects Plug-in)
Same Image – Different Plug-In (Topaz B&W Effects and Lens Effects Plug-ins)
Sunny Preset for Topaz Black and White Effects
The Art Corner: Painting and Sculpture by Tassaert (Topaz B&W Effects Plug-in)
Quad Tones in Topaz Black and White Effects Plug-in
Get Rid of Those Power Lines Fast – with Paths and Spot Healing Tool! (Topaz B&W Effects Plug-in)
Why I Love Topaz Adjust!
Just Another Topaz Black & White Effect Example
Topaz B&W Effects vs. Nik’s Silver Efex Pro
Topaz B&W Effects Plug-In – A Real Winner!
Topaz Lens Effects Plug-In
Topaz InFocus Plug-in – Digital Lady Syd’s Review
More Filmstrip Fun – How Can This Be? (Topaz Detail Plug-in)
Instant Mirror and Quick Mirror for Photoshop (Topaz Simplify Plug-in)
How to Add Images to Text (Topaz Simplify Plug-in)


Topaz B&W Effects Plug-In – A Real Winner!

I will start off and say I am a major fan of Nik’s Silver Efex Pro 2 so I was not expecting anything as good. Still I have always felt Topaz does a great job for us budget-minded Photoshoppers and they have not let us down with this plug-in! These guys just keep making better and better plug-ins and still keep their prices reasonable. (Click on my Tidbits Blog for a link to Topaz and this new black and white plug-in – they have a 30-day free trial to download, and my short blog called “Topaz B&W Effects vs. Nik’s Silver Efex Pro.”)

The above image was just a basic black-and-white conversion using the Traditional Collection and the Classic preset. Go to the Conversion section on the right and adjust exposure and color to enhance your picture and finally go to the Local Adjustments sections where the best part of the program lies (in my view). You can locally correct the image using a Dodge, Burn, Color (brings color back into the image slightly if you want), Detail (I love this one – like Structure in Nik) and Smooth brush; and you have an Overall Strength slider to increase the effect and a layer mask to see how it is being applied. If you mess up, just switch to the Erase Brush and remove while viewing the mask. This gives similar results to the localized points that Nik has (and which is why everyone loves Nik). It is interesting to see how Topaz has come at this same result from a totally different direction and it seems to work beautifully!


For this image, the Opalotype Collection Effect-Yellowing Lilac preset was the starting point, but major adjustments were made in the right hand sections and this is the final result. I love the partially tinted feel – it really felt like Arizona did that day (it was 110 degrees outside). This is why this program has a lot more to offer than Nik’s plug-in which is essentially a black and white plug-in. In Nik’s defense, their Color Efex Pro plug-in probably does cover what the rest of the this filter is doing.

If you find some settings you really like, be sure to save them as a preset so they appear in the list for the collection you were using. I always put an SJ in front of the ones I create so I know which ones they are. There are a couple of things I do not love. For one, in the Finishing Touches section the Vignette is a little hard to apply, and it cannot be applied in different colors. I do like the Edge Exposure option which frames the image really nicely (like in the image above), but I do not care for the Border option. I do not usually use a plain white or black border around an image, so I will be going back to my old stand-by OnOne’s PhotoFrame for this.  One of the best parts is the Transparency option with the Overall Transparency slider to bring back some of the image color without having to go back into Photoshop and change blend modes.

Here are a couple more examples of what I did rather quickly in Topaz and got some really different results.

Below is an example of an image with the overall Transparency adjusted so you can see some of the color come back in. I believe it is a very pretty effect and has a bit of vintage look to it.

As you can see, there are a lot of variations to this plug-in and I have not even begun to explore all the options. I do believe Topaz has hit a winner  here and will keep most Photoshop lovers busy with all kinds of creative results. I am happy to see this company take on the big guys once again and create what I think is a great new plug-in for a reasonable price! Thank you Topaz! ……Digital Lady Syd