These beautiful pink dahlias grow in my front yard. This image composition really fits the criteria for a good vintage feel. One of the major objectives is to have some nice negative space – or blank area – in your image to show off the textures. This image had a clean light gray background because they were shot in front of a white board on a shaded porch with lots of natural light before being planted. If they are planted already, try using a very wide open aperture setting so the background is blurred slightly, or have someone hold a white reflector behind them while shooting (and one over them if it is a really sunny day – overcast days are the best for photographing flowers). This image was shot at eye level using a 60 mm AF Micro Nikkor at F6.7. After uploading to Lightroom, the image was cropped and all the sliders in the Basic section were adjusted. In Photoshop bad spots on flowers were cloned out and then the following layers were added: 1) the new Color Lookup 1 Adjustment Layer using 3DLUT File set to FoggyNight preset (gives a more purplish flower color) at 89% opacity; a Gradient Fill Adjustment Layer (adds the pinkish bottom half) set to a deep brown red color (foreground color in Color Picker) to translucent gradient, Linear Style, 90 degree angle and Scale 149% with layer opacity set to 39%; Paul Grand’s terrific Scratches Texture set to Soft Light at 38% layer opacity and removing some cracks using a layer mask on texture; ShadowHouse Creations Old Photo 2 (click Large View and right click to select Save Image As) set to Soft Light at 100% (gives the beautiful old looking frame around image); ShadowHouse Creations Bokeh 2 (really lightens up the image) set to Soft Light at 62% opacity – painted out most of the bokeh on a layer mask; ShadowHouse Creations T2 (this is one of my favorite textures – old lace) set to Soft Light at 63% opacity; a Curves Adjustment Layer to add a little contrast back into the image; and finally a Levels Curve with black Output tab set to 8 to lighten the whole image only a little. This is really not as hard as it seems. The important thing is that you need find a few favorite textures and then try them out on various dark and light images to get a feel for how they look when set to different blending modes and opacities. I use Soft Light frequently for the textures but try out other blend modes to see what they will do. The textures used in the above image are some of my favorites.
One of the reasons I am so inspired this week is that Sarah Gardner‘s Art Beyond the Lens book on using textures in your digital images finally was reprinted and came in the mail. She creates some beautiful textures on her website along with some beautiful images. Her book is a great read and very easy to follow. She demonstrates a few different techniques for adding textures and using some of Photoshop’s other tools to create beautiful effects! The above was my first attempt using some of her tips and I am pretty happy with it. These flowers are called Phloxy Lady Phlox and also grow in my front yard. Both textures are from free give-aways Sarah had going a few months ago, one is Beyond – Seagrain Dark set to Soft Light at 100% opacity and Artisan Ink set to Overlay at 42% opacity. She also posts interesting things on her Facebook page so follow her. The frame is my basic layer style using sampled colors from the image (see DLS Free Layer Style Frames blog).
Here are some delicious chocolate covered strawberries from the Melting Pot Restaurant. For starters, this was a five image HDR processed using Nik’s HDR Efex Pro 2. Then in Photoshop lots of the same textures were added – Caleb Kimbrough’s Summer 5 texture set to Overlay at 34% opacity to get that beautiful golden Tuscan feel; Paul Grand’s Scratches Texture (link listed above) used twice to give it more interest (both set to Soft Light with 50% and 23% layer opacities – using layer masks to paint out different parts of image); and ShadowHouse Creations OldPhoto 6 set to Overlay at 100% opacity. Now here are a couple things you can do to get a really nice vintage feel. Next a Color Fill Adjustment Layer was added and the color I used was a deep red (49250f) – it was set to Soft Light at 80% opacity and the plate and chocolates were painted out with black in a layer mask. This created the marvelous deep brown in the upper background especially. I now realized I had some texture areas that were slightly bare looking so this time a New Layer was added on top. Using Gorjuss Grunge Again Brushes (unfortunately these are no longer available but any grunge type brush would do) with Brush 01 at 30% and sampling a darker brown color in the image for foreground color, the area in the upper right was filled in lightly. Another New Layer was created using Brush 08 at 30% and sampling a lighter brown color; and finally yet another New Layer was added using Scratch Heavy Brush (this is a mystery brush – not sure where I got it) at 30% and rotating it 90 degrees to paint in the top with a yellow-gold color sampled from the image. A few more strokes were added to the left to brighten the image a little more. If you find you have a hole or want a little different texture, go back to your brushes and see if you have something that will fill it in. In fact you can make your own textures with these brush effects.
Here is another example of following Sarah Gardner steps from her book. I added three textures using Russel Brown’s Texture Panel (see my blog links below to find more information on this wonderful free panel) – ShadowHouse Creations T2 lacy texture (see download link above), Oil Painting-2 and Painted Clouds. Parts of the lacy texture were painted out to sharpen the mid-section flowers, which is the focus of the image. Something different I did and have not really seen before is to add a Pattern Fill Adjustment Layer set to Parchment at Scale 397%. Then the layer mask was filled with black and just the foreground flowers were painted with the pattern texture. Finally the layer opacity was set set to 35%. Since I wanted a little color in those areas, a Hue/Saturation Adjustment Layer was added and linked to the Pattern Fill Adjustment Layer below by ATL+clicking between the two layers (a little box shows let you know it is working) so the changes in the Hue/Sat Adjustment Layer only occur on the layer below. The Hue was set to +292, Saturation +34, Lightness +21 and Colorize was checked – this gives the light pink color to the grain in the foreground flowers only. That was it – used my layer style to frame the image (see DLS Free Layer Style Frames blog). I believe this image portrays that soft Victorian look quite nicely.
Since this is such a long post, here is a summary of what I think is important about using textures.
1. Textures definitely add that old time look to an image if used properly. Flowers really benefit from this type of look. If you check out some of my blogs below, there are some landscape images using textures that turned out really nice.
2. The Pattern Fill Adjustment Layer can add a vintage feel to your images – they look like a texture when added to an image and by using the Scale slider, very different effects can be created. (See image 4 information.)
3. The new Color Lookup Adjustment Layer in CS6 also gives you another way to add texture and color to get the vintage feel. (See image 1 information.)
4. Create a New Layer and use unique brushes – there are many grunge brushes and scratch brushes available for download on the internet. Sometimes it is necessary to create a texture using brushes to fit the needs of your image. And don’t forget you can change the settings to make the brush stroke in a different direction or to stretch out the spacing. (See image 3 information.)
5. Use a Gradient Fill Adjustment Layer to give some color variation and then paint out in a layer mask areas you do not want affected. Be sure to try different blend modes. (See image 1 information.)
6. Use a Color Adjustment Layer to add a bold color and then reduce the opacity of the layer. Again, be sure to try different blend modes. (See image 3 information.)
7. Use Russell Brown’s texture panel to try out texture looks really fast – this is a really great tool (see download information in blog links below). The Flypaper Textures that are loaded with the panel create some wonderful results. I also keep a folder of my favorite textures on my Desktop so I can access them really fast when using this panel. (See image 1 information.)
It usually takes several attempts to get the effect you want. All these images took several hours to get the look I liked. If one techniques does not work, try a different one. Check out some of my blogs below to find more ways to create the vintage feel in Photoshop. …..Digital Lady Syd
Digital Lady Syd Related Blogs:
How to Create Unique Watercolor Background Texture
How to Create Unique Textured Backgrounds
Russell Brown’s Paper Texture Panel – A Real Winner!
Orchids with Russell Brown’s Paper Textures Panel
Russell Brown Texture Panel Landscape Image
Tips for Flower Textures
Using Color Efex Pro and Texture for a Warm Hawaiian Landscape Effect
Create a Winter Scene with Photoshop Brushes and Textures
Adding a Texture for Flair!
The Soft, Dreamy Look
Soft-Look Flowers Using Textures