It is that time where I try to put some perspective on my images for the past year and choose the ones that appeal to me most. I had a nice year and got to see some pretty interesting places. I try to see which images I would place in my home. Here is what my “inner critic” thinks are some of my best.
10. Below is an image shot while in the Lightner Museum looking down at my favorite lunch spot in St. Augustine, Florida, the Cafe Alcazar which is located in the old hotel pool area (see Bathing in Casino on Shorpys website for how the pool looked in 1889). For more info, see my Tidbits Blog Cafe Alcazar and Vintage Topaz Adjust.
9. I love this sort of illustrative and humorous effect. This image is of a whale taken during the Shamu show at the SeaWorld Orlando Theme Park. For details on processing, see my Storytelling with Your Images blog.
8. The Big Island in Hawaii was one of my most favorite places I have ever visited. This photo art image depicts how I think of Hawaii. I discuss how I created the effect in my Using Color Efex Pro and Texture for a Warm Hawaiian Landscape Effect blog.
7. This lovely mallard duck pair’s image was taken at the SeaWorld Orlando Theme Park in Florida. This image used a texture by 2 Lil Owls and the new Topaz (for website link see sidebar at my Tidbits Blog) Detail 3 to bring out details and color, especially in the feathers and eyes.
6. This old corvette was for sale at the 39th Annual Turkey Run at the Daytona International Speedway infield. This is my favorite type of car – so I had a great time photographing all the corvettes. (More will be showing up in my future blogs as I have a lot more corvette images.) To see how I processed this image, see my Little Red Corvette Tidbits Blog.
5. Miniature Mums were used in a lot of my images this year. I like to photograph the flowers I grow. I have been trying to improve on my macro shooting this year. To see how this flower was processed, see my Tidbit Blog Just Bloomin” Beautiful!
4. The wild surf is at Laupahoehoe Harbor on the Big Island. In my Dr. Brown’s Painting Assistant Panel for CS6 and CS5! blog I used this same image with an artistic feel to it. Nik Color Efex Pro’s Detail Extractor filter helped give this image the sharpness.
3. I am always surprised how nice the flower pictures are that I get at the local grocery stores with my inexpensive Kodak point-and-shoot camera. These beautiful pink roses were shot at my neighborhood store. Post processing included adding 4 textures – two I bought from French Kiss’s website and two from a wonderful Flickr site by Lenabem-Anna which contains many beautiful vintage and painterly textures. I used her textures 130 and 72.
2. The purple lily pad image is one of my artistic experiments that I really like. They were taken at the Hilton Waikoloa Village by the Japanese Restaurant. To see how this effect was created with a slightly different result, see my Tidbits Blog Purple Lily Pads!
1. It is hard to top Hawaii for beautiful everything. I settled on this image from along the road to Waipio Valley as my favorite of the year since it totally reminds me of my trip to the Big Island – the bright sunlight, the beautiful surf and the gorgeous clouds hanging out. To see how I processed this image, see my Nik’s Viveza 2 Plug-In – A Hidden Gem! blog.
It’s been a great year and I have learned so many new things about post-processing my images in Photoshop. Hope you have enjoyed some of my blogs too. I hope next year is as fun and productive. Happy New Year Everyone!…..Digital Lady Syd
I am constantly amazed at how some of my images turn out – not at all what I had expected. This week I am going to go through my photo art workflow step-by-step so you can see what a difference a little tweaking will do. One of my favorite image types to play with in Photoshop are shots of art works. It is a nice break from cleaning up photos of family and large travel landscapes and gives me the opportunity to be creative. This image is of a type of art I had never heard of before that is on display at my favorite local museum – the Lightner Museum in St. Augustine, Florida. These are examples of Victorian era cigar band art. The Photoshop-processed image above is my final photo art result and the one I liked the best, but there were several other choices I considered.
NOTE: If you want to see the settings used for any of the steps, just click on the image and the larger Flickr image will appear.
- Here is the initial image as a RAW NEF file. The dishes were enclosed in a glass case and the camera settings were a 44-mm lens at F/4.8, 1/8 sec, and ISO 1250. There is a lot of light glare on the pieces. This image is not one I would normally choose to process, but I just loved the composition of the items and the colors in the cigar bands.
- My next step was to create a Virtual Copy in Lightroom (this does not have to be done if using Adobe Camera Raw in Photoshop) to try to clean up the tone a little before going into Photoshop. Since only a few changes were done here, it does not look much different. First I go to the Lens Correction section and select the Profile tab where I set my lens info, and then the Color tab where I check Remove Chromatic Aberration (this can save a lot of time later). The next step would be to adjust the Crop of the image if it needs it – in this case it did not. Now adjust the Basic sliders. Also check out the noise in the image and try to correct if needed. Next I right click on the image in Lightroom and select “Edit In -> Edit in Adobe Photoshop CS6” which now opens up Photoshop, if it is not already open, with your image.
- I am a big fan of combining my plug-ins until I get just the effect I like. If I do not like what results, I just delete that layer and try again. I always duplicate the background first so I know what the image looked like to start. On a really difficult image, which I considered this one to be, I usually will first open up Nik Color Efex Pro 4 – they have so many filters, you can sometimes get a great look right away. Shown below are stacked filters Tonal Contrast, which I believe is one of the best filters in this plug-in; Pro Contrast, which is one of my personal favorites, and works wonders on many of the images I have processed; and Brilliance/Warmth, one of the most popular Color Efex filters – just adds a really soft warmth to an image. Usually I like the Detail Extractor, but it really looked bad on this image due to all the glare on the items. Note that before entering the plug-in, I created a Smart Object (right click on your duplicated layer in Layer Panel and select Convert to Smart Object in menu) as Nik plug-ins work very well with Smart Objects. It allows you to go back into the plug-in and all settings and control points will still be in place so they can be readjusted easily.
- Since there is so much glare in this image, there is only one plug-in I know of that does a good job controlling it and that is my most used plug-in, Nik Viveza 2. It will almost always improve if not remove problem areas on an image. You can see I have added 10 control points on the glare areas (click on image to see the little round circles more clearly in Flickr) to try to even out the tone. By comparing to the above, it is not perfect, but what a difference it makes! The detail and saturation of the image is also much improved. (See my blog Nik’s Viveza 2 Plug-In – A Hidden Gem!)
- Still have issues where the glare is – it needs to be cleaned up and the pink removed since it draws your eye into the left corner and it is distorted by the glare. The Color Replacement Tool was used to turn the pink color turquoise (see settings used in Options Bar in photo and turquoise foreground color in swatch) and some cloning was done on the dish to even out the pattern where the glare blows out the detail. A Hue/Saturation Adjustment Layer was used to get rid of another pink hot spot. I usually try to work completely non-destructively (meaning the original image was not changed by any of the adjustments made on the layers above), but the Color Replacement Tool is destructive and changes are made on the image itself – the Hue/Saturation Adjustment Layer may have been a better choice for this problem area.
- I always add or at least try to add a Curves Adjustment Layer to adjust the contrast towards the end of my workflow. Since I thought I was almost done, it seemed appropriate to add it now. Below is what my curve looked like for this image. I usually just drag the Hand Tool (located in the upper lefthand corner of the panel) in the image to get this correct. It usually is just a subtle change but very significant. In this case I only wanted to brighten up the plate and mug where the color was located, not enhance where the glare was. The Curves Adjustment layer mask was turned black by clicking on the mask and CTRL+I to invert the color from white to black. Then a soft 30% opacity brush was set to white and used to gently paint back the areas where the I wanted additional contrast and color. This was a good point to create a composite layer that combines all the layers below into one on top by clicking (CTRL+ALT+SHIFT+E) – this helps when the number of layers gets large as some techniques need a single layer to work correctly – this can especially be a problem with the Clone Tool.
- At this point I thought I was getting the image to a final look. I decided I wanted sort of a vintage type edge on the image, so I used one of my very favorite textures, ShadowHouse Creations Old Photo 6. After trying several blend modes, I selected the Exclusion blend mode (which I do not use that much but worked in this case) set to 53% opacity. Still not sure it was quite what I wanted so I decided to add one of his new Assorted Mask Overlay (08) and set it to Soft Light blend mode at 100% opacity. Basically just the beautiful edges were used on both layers, and the image center was mainly painted out using black in the layer masks to keep the basic image intact. I often use the free Russell Brown Paper Texture Panel to try out and stack the various textures (the green square at the top of the icons to the left of the panels opens it up).
- I must be done???? But then I thought, I wonder what happens if I take this image into the new Topaz photoFXlab (see sidebar for website in my Tidibits Blog). Well that proved to be a problem because I started finding all kinds of new effects I liked on this cleaned up image. The settings below were applied as a first step to the bottom layer for all the different Topaz effects tried on this image.
- I duplicated the bottom layer in the plug-in and applied from the Effects tab a preset called Lithography by H. Hurst (Topaz used the preset from Topaz Detail) and set the layer to 65% opacity. In the Adjustment tab, the Saturation slider was set to 20. The Dodge Brush was used from the Brush tab to whiten around the pupil of the eyes of the girl on the plate using a brush strength of .10. Next the lips were slightly reddened using the Saturation brush. It was saved in the new Topaz extension .pfxl so the settings could be readjusted at a later date if needed. Clicked OK and applied to it to the image in Photoshop. At this point I did create a note to remind myself exactly what I did in the plug-in since I am still learning about the new extension. The image that resulted is shown below.
- To be honest, I just didn’t love the final result so I decided to delete the layer where I applied the photoFXlab plug-in and start over in this plug-in. This time I decided to try out the results using the Plug-in tab and selected Topaz Adjust 5. Here I tried out one of my favorite presets I created from the French Countryside preset in the Vibrant Collection. It looked nice and more like what I wanted. I use this preset a lot when I want a nice artistic feel.
- I decided to try one more preset just to see if I liked it and sure enough, it is the one I selected. It is in the Stylized Collection and is called Painting-Venice. I added several settings in the Finishing Touches section: Transparency – Overall Transparency slider to .7, Color – Warmth 0.03, and Tone – Quad Settings as shown on the image – the correct colors should be set already. Once out of the Adjust plug-in, in the Adjustment tab Exposure was set to 0.38, Contrast to -3 and Dynamics 24.
Well this is a good example of my workflow for a photo art image. I could have used OnOne Software’s wonderful Perfect Effects (see sidebar for website at my Tidbits Blog), or any of the other plug-ins offered by Topaz, but it just depends on what I think will work. Overall the main components are 1) process as discussed above in Lightroom, 2) take into Photoshop and do any clean up, 3) add plug-in effects, 4) add any textures if you want, 5) I always go to Viveza 2 now, 6) do any extra sharpening or noise reduction that might be required, 7) add a Curves Adjustment layer for final tone and contrast, and 8) add any framing. I hope you can see that even though a change is very small, it can be very significant to the photo, and that you can always change your mind. An image can take on such a different feel with different plug-ins and textures applied. I thought originally I wanted a very sharp almost HDR look for this image, but I ended up with a very bright painterly result. I am happy with it but it is not exactly what I had in mind when I started! …..Digital Lady Syd
This new feature is taking the Photoshop world by storm! What a great new addition to Lightroom’s 4.1 upgrade. If you have Lightroom 4, you have got to try this. Matt Kloskowski, one of the NAPP Photoshop Guys, created a nice short video, A New HDR Feature in Lightroom 4.1, on how to process your images using the Merge to HDR in Photoshop, and then bringing the 32-bit tonemapped image back into Lightroom to use with the camera raw sliders. The image above is from the Hilton Waikoloa Village – some of the unusual art that is in this complex. After processing the 32-bit image using Lightroom sliders, Nik Color Efex Pro 4 was applied within Lightroom using these filters: Detail Extractor adding (+) control points on only the sculpture itself, Midnight using Neutral mode, and BiColor User Defined Preset 02 Brown/Pink and using (-) control points on the sculpture. The image was taken back into Photoshop (now as a 16-bit psd file) to add OnOne PhotoFrame acid burn controller 06 (see sidebar for website in my Tidbits Blog), which could have also been added in Lightroom. The Nik plug-in could have been added in Photoshop and a Smart Object used to save the setting – instead I created a Note in Photoshop to recall how the settings were used used in Lightroom.
What is absolutely amazing about this addition to Lightroom is that the images are so sharp and clear with little noise especially in the skies like you get with the other HDR processes. It is totally amazing that neither of these images had any sharpening or noise reduction applied. Wow!
Here is my first attempt at creating a 32-bit image using three bracketed images hand-held of the beach on the perimeter of the Hilton Waikoloa Village – not a very good place to sunbathe but nice and breezy. No other plug-ins were applied to this photo. I was major happy how clear and sharp this image came out. The frame was created using the layer style instructions for my Digital Lady Syd’s Free Layer Style Frames – colors can be sampled from image and changed out easily.
What is happening here is that inside Lightroom you select your bracketed images, right click and Edit In – Merge to HDR. This opens up the HDR program in Photoshop where set the tonemap setting to 32-bit, not 16-bit. Next check the Remove Ghosts box. Close and if you do not have your Preferences set up in Lightroom to save your HDR’s as TIFF’s, you need to do a Save As, name file, and select TIF as your format to bring back into Lightroom. Once back in Lightroom you are free to use all the sliders available to create the look you want on the 32-bit image. The image can be taken back into Photoshop to add your framing or plug-ins if you want, where it is now back at 16-bit mode.
I am still amazed how great these images are looking. This image is of some colorful plants at the entrance to the Lightner Museum, in the old Alcazar Hotel, St. Augustine, Florida. After processing as a 32-bit image in Photoshop and bringing back into Lightroom, the image was taken back into Photoshop and the new Topaz photoFXlab v1.1 plug-in (see sidebar for website in my Tidbits Blog) was opened and the Dynamics slider applied at 55. I also removed a very small amount of noise with Imagenomics Noiseware. This is my free Thin Double Edge layer style frame (see link above) with colors sampled from the image and that was it. This image is incredibly clear!
My last example once again was processed in Lightroom as a 32-bit hand-held HDR. I did apply a little Nik Color Efex Pro 4 Detail Extractor to the gargoyle only to sharpen it a little. No noise reduction was applied, only my Thin Double Edge Frame layer style applied to the image. Very easy. This image was taken at Flagler College (the old Ponce de Leon Hotel) in St. Augustine, Florida.
I am going to have to go back through my old HDR images and update them. This process is totally amazing if you want a very natural HDR look. Wonderful new feature! It is a pretty easy procedure to follow and the results are definitely worth keeping!…..Digital Lady Syd
Digital Lady Syd Related Blogs:
32-Bit HDR Using Lightroom and CS6